Freejump Carbon Voronoi Precious Crystals Helmet with Temple

Freejump Carbon Voronoi riding helmet with temple protection. Riding helmet with 12 sizes available.

Brand

Freejump

Product type

Riding helmet

Recommended use

Horse riding

Color

Black, Silver

Available sizes

52S, 53S, 54S, 55S, 56S, 56M, 57M, 58M, 59M, 60L, 61L, 62L

Size

Adult unisex

Main features

• Head protection equipment for horse riding.
• Carbon fiber shell with in-molding, low-density EPS core, and detachable temple protection.
• Certified according to EN 1384:2023 (current European standard, which integrates VG1) and ASTM F1163-23.

Head protection equipment is mandatory in federated competitions. This model is certified according to the European standard EN 1384:2023—which replaces the 2017 version and integrates VG1—and the American ASTM F1163-23.

Next-generation protection

The Voronoï Carbon combines three barriers into a single structure, and this layered construction is what accounts for its impact resistance:

• Carbon fiber outer shell. Layers of interwoven fiber, a high-tech material with exceptional impact resistance.
• In-molding. A polycarbonate sheet overmolded onto the inner shell, which adds an extra protective barrier between the outer casing and the EPS. Freejump took the idea from bicycle and ski helmets.
• EPS core. The carbon and in-molding allow for the use of a low-density expanded polystyrene foam inside, one of the most absorbent on the market. A rib integrated between the upper part of the shell and the temple area reinforces the structure and provides crush resistance far exceeding the standard.
• Temple protection. The Voronoï is the first riding helmet with temple protection. It is detachable and can be reassembled.

Why it protects the temples

The temporal area is where 80% of serious brain injuries are concentrated. Behind the temporal bone is the middle meningeal artery: a minor trauma can damage it, cause a hematoma, and compress brain cells. The Voronoï is the only helmet that specifically treats this area, absorbing the shock wave and distributing it over a wide surface.

Freejump recommends choosing the full configuration, with temple protection, both for safety reasons and because it is the setup that allows for the attachment of the Freejump Intercom by Cardo. If you choose the helmet without it, the temple protection can be added later.

Protection against rotational impact is covered based on the work of the WG11 group, without added artifice.

Lightness, ventilation, and comfort

• Weight: about 500g without the lower temple protection, with liner and long visor; about 600g with it.
• Ventilation: two inlets in the outer shell, front and rear, and 20 openings in the inner shell. The Voronoï pattern, of irregular geometric cells, is not just aesthetic: each cell is placed to simultaneously maximize resistance and airflow.
• Inner liner: high-quality Italian fabric. It is removable and washable at 30°C and air-dried.
• An ABS crescent clipped onto the front edge of the liner directs airflow as it enters the helmet through two openings.
• Customizable: shell, in-molding, ear clips, vents and their grilles, and visor.

Certifications and independent rating

• EN 1384:2023 — current European standard, which replaces the 2017 version and integrates VG1.
• ASTM F1163-23 (SEI) — American standard.
• 3 out of 5 stars in the Virginia Tech Helmet Ratings, with a score of 4.21 in the evaluation published by the independent Virginia Tech laboratory, which is the one that subjects helmets to the most demanding tests in the industry.
• Made in France, in Freejump's own workshop.

Size guide

Range available for this model: 52S, 53S, 54S, 55S, 56S, 56M, 57M, 58M, 59M, 60L, 61L, 62L. It is advisable to check your measurements against the manufacturer's specific table. For helmets, measure the circumference of the head with a soft tape measure, approximately 1 cm above the eyebrows and above the ears. The measurement in cm corresponds to the size.

The Voronoï has three shell sizes (S, M, and L) and the fine adjustment is provided by the inner liner, which ranges from 52 to 62 cm. That is why the size is written by combining the two figures (for example, 56M is shell M with a 56 cm liner):

Care and maintenance

Clean the exterior with a damp cloth and mild soap. The interior pads, if removable, should be hand washed. It is not recommended to use solvents or put it in the washing machine.

Frequently asked questions

When should it be replaced?

As a general recommendation, after any strong impact, a helmet should be replaced even if it shows no visible external damage. After several years of use (5 years as a common benchmark), materials also lose their absorption capacity.

How is the head size measured?

With a soft tape measure, around the head, approximately 1 cm above the eyebrows and above the ears. The measurement in centimeters corresponds to the helmet size.

How is it cleaned?

Externally with a damp cloth and mild soap. The interior pads, if removable, can be hand washed. It is not recommended to use solvents or put it in the washing machine.

Technical specifications

What standards does this helmet meet?

Freejump declares compliance with the European standard EN 1384:2023—which replaces the 2017 version and integrates VG1—and the American ASTM F1163-23. Additionally, the independent laboratory Virginia Tech gives it 3 out of 5 stars.

Can I buy it without temple protection and add it later?

Yes. The temple protection is detachable and reattachable, and can be added later. Even so, Freejump recommends the full configuration, both for safety reasons and because it is the one that allows for the attachment of the Freejump Intercom by Cardo.

How much does it weigh?

About 500g without the lower temple protection, with liner and long visor, and about 600g with it.

Can the liner be washed?

Yes. The inner liner is removable and washable at 30°C and naturally air-dried.